Operators Gallery

Used to place elbow components.

Accessed from the Piping ribbon.

The following gallery displays which can be left floating or docked to the drawing area.

Component	<Component Class> in Placement Key In syntax (Mechaddin Place <Component Class> dsc=Piping)
Hand Wheel Operator	HAND_WHEEL
Valve Wrench Operator	VALVE_WRENCH
Bar Handle Operator	BAR_HANDLE
Cube Operator	CUBE_OPERATOR
Cone Operator	CONE_OPERATOR
Seal Cap Operator	SEAL_CAP_OPERATOR
Diaphragm Operator	DIAPHRAGM_OPERATOR
Gearbox Operator	GEARBOX_OPERATOR
Pneumatic Actuator	PNEUMATIC_VALVE_ACTUATOR
Electric Valve Actuator	ELECTRIC_VALVE_ACTUATOR
Diaphragm Gear Operator	DIAPHRAGM_GEAR_OPERATOR
T-Bar Handle Operator	T_HY_BAR_HANDLE
Cylinder Operator	CYLINDER_OPERATOR
Chain Operator	CHAIN_OPERATOR
Motor Operated Valve Actuator	MOTOR_OPERATED_VALVE_ACTUATOR

Placement

Placement of operator type components usually consists of the following common steps:

Set the size and spec in the Standard Preferences dialog.
Select an option from the Operators Gallery.

Note: If there is more than one record in the specification that meets the criteria, you are prompted to select a specific record from the Spec Record Selection dialog.

Pick the valve on which to place the operator.
Select an orientation (rotation) of the operator.